| PLL using the LMX2306 |
Personal Stuff
|
This page will be updated as Material becomes available. This New System will essentially replace the original BCD Design originally designed by WB6IGP and N6IZW and appeared in ARRL UHF/Microwave Project Manual. Their efforts were later revised by WA6CGR. This New Design eliminates the many short Falls of the BCD Divider Chips and Implements actually 3 PLL Circuits that are extremely clean up to and including 47Ghz. One Huge advantage of this System is the ability to select any divisor factor appropriate for any XTAL Freq. i.e. 94.666667Mhz to sight one example only. Please check Back Soon. Below are some Image indicating what will follow as time permitts.
New PLL System.
106Mhz VCXO for 24 & 47Ghz, installed in an Old Brick Housing:
Tri-PLL System, again installed in the seconds compartment of the same Brick Housing as VCXO Above
At this Point in time the system has been tested with a through hole 74HCT7046N and the AMX SM Vesion has yet to be installed on the PLL Board. If Interested in more information Please Contact me. Regards & Thanks, Darrell
Auto Tracking Systems
Canadian Amateur Radio Station VE1ALQ & VE9DW |
VE1XYL when allowed