Amateur Radio Site Of  VE1XYL & VE1ALQ, or VE9DW  

This is a JTAG board I made to program Luis, CT1DMK's  excellent VCXO board, and it works great. One word of caution,  the cable length from the DB9 to the JTAG header connector should be as short as possible. The cable used here is approx. 20" long from the JTAG interface board that connect directly to the Parallel Port.

There is not a lot to explain, and it is all here, either in Image form, or CirCad98 .sch & .pcb format, these two files are zipped for downloading together.  If anyone has a question please contact me at mail to: ve1alq-at-nbnet.nb.ca .

 Please note that ALL numbering on the board in a brownish colour identifies the corresponding DB25 and JTAG header Pins.      Luis has done a great job on his contribution to VCXO stabilization and I hope this will help those in need of same project.

 There are considerable comments and descriptions of VCXO's to follow, especially in the low phase noise designs, that are not quite ready at this time.

 ByteBlaster Classic: Schematic   This is the JTAG I use and works great on ALL parallel ports I have tried

ByteBlaster Classic:    PCB    

Completed and functional  JTAG 

Canadian Amateur Radio Station VE1ALQ & VE9DW VE1XYL when allowed

BUY BACK LINKS
Pages viewed since 1999